GYEON Q² Rim - Wheelcoating 30 ml

  • SKU: Q2RIM30
  • The classic among wheel sealants
  • Heat-resistant up to well over 800°C
  • Protects against brake dust and road dirt adhesion
  • For wheels, engine parts, and exhaust
Warnings according CLP regulation
  • H226 Flammable liquid and vapour.

  • H315 Causes skin irritation.

  • H373 May cause damage to organs.

  • H412 Harmful to aquatic life with long lasting effects.

39,95 €
1.331,61 € per 1 l
incl. 19% VAT , plus shipping costs
  • Available immediately
  • Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

The Gyeon Q² Rim, a wheel coating by Gyeon, is highly resistant to high temperatures, withstanding over 800°C without affecting the coated material. It provides excellent self-cleaning properties, reducing the need for frequent wheel cleaning and allowing more time for driving enjoyment. The coating protects against excessive brake dust buildup, making regular wheel washing easier with just water and moderate pressure. Q² Rim is safe to use on all types of wheels, including painted, powder-coated, anodized, and polished finishes.

  • Tip 1: Q² Rim can be applied undiluted with an airbrush, eliminating the need for polishing or leveling due to its uniform spray application
  • Tip 2: Although a single thick layer of Q² Rim is sufficient, layering for enhanced performance is possible, with a waiting time of at least 4 hours between coats
Content: 30 ml
pH resistance value : 2 - 11
Temperature resistance: > 800° C
Consumption: approx 15 ml / rim set
Durability: up to 12 months > 30.000 km
Content: 30,00 ml
  • 1 piece of GYEON Q² Rim 30 ml
  • 1 piece of GYEON Q²M Block Applicator 4 cm x 9 cm x 2.5 cm
  • 4 pieces of GYEON Q²M Suede 10 cm x 10 cm
  • 1 piece of GYEON Pipette

Before you begin, wash and degrease the wheel surface with effective cleaners in this sequence:

  1. GYEON Q²M Iron Wheel Cleaner - Wheel cleaner
  2. GYEON Q²M Prep - Pre-cleaner
  3. GYEON Q²M Clay - Cleaning clay (for heavy contamination)

Apply Q² Rim evenly and thinly. Wait about 5 minutes before smoothing any irregularities (high spots) with a soft microfiber cloth.

A second layer (after a minimum of 4 hours) is only necessary if you feel you haven't achieved 100% saturation. If you're unsure, you can apply a second layer for maximum coverage.

Others also bought: