After two years of intensive research and development, it was time to take the Gyeon coating spectrum to a new level: through technological advances in the chemical group of polysilazanes, Gyeon has succeeded in almost doubling the durability while drastically simplifying the application process. The application and removal window has been significantly extended with the new formulations.
Furthermore, all the new coatings in the EVO version no longer require a 2-layer application, but only a single layer. Additionally, they can now be applied outdoors in fresh air; a garage is no longer a mandatory requirement. The only important factor is to ensure a dry spot for the following 12 hours and some shade during application.
The legendary Q² CanCoat EVO is the easiest entry into the world of ceramic coatings. This user-friendly spray sealant enhances color richness, boosts gloss, and gives the paint more depth. After the drying time, the product leaves an exceptionally smooth protective layer that will impress you.
Q² CanCoat EVO provides car paints with protection against UV radiation, strong chemicals, bird droppings, road salt, and oxidation. It maintains its water-repellent and self-cleaning properties for up to 12 months or 12,000 km.
Simply spray onto the included microfiber towel and spread on the paint until it reaches a high gloss - that's how easy it is to apply Q² CanCoat EVO! It is an exceptionally durable silicon-based sealant, conveniently packaged in a pump spray bottle, and can be applied to almost all surfaces: paint, metal, vinyl/film, plastic, carbon. It is equally effective as a standalone sealant and as a topping to an existing coating.
| Content: | 200 ml |
| Consumption: | approx 30 g / per vehicle |
| Durability: | up to 12 month / 12.000 km |
| Product type: | Wash / Detailing mitt |
| Content: | 200,00 ml |
- 1 piece GYEON Q² CanCoat EVO 200 ml
- 3 pieces GYEON Spray Heads
- 1 piece GYEON Microfiber Polishing Cloth 40 cm x 40 cm
The better the surface is prepared, the better the results in terms of gloss, durability, and water beading effect. Follow these steps for thorough preparation:
- Thorough pre-wash and decontamination using Q²M Foam, Q²M Tar, Q²M Iron, Q²M Clay
- Polish all painted surfaces to a high gloss using Q²M Polish and if necessary, Q² Primer
- Wash the vehicle with a strong degreasing detergent, e.g., dish soap and hot water.
- Remove all contaminants, waxes, and oil-based polish residues using Q²M Prep (IPA alone is not enough)
- Shake the bottle, apply one to two sprays of Q² CanCoat on the included microfiber towel
- Spread the product evenly on the paint, working on smaller sections at a time
- After 10-30 seconds, use another soft microfiber towel to remove any excess and polish the surface
Question: Can the Gyeon CanCoat spray nozzle be used multiple times?
Answer: Rinsing the spray nozzle with warm water immediately after use increases its durability.
